we are in all over uae

sandancelogo

Home   >   Blogs

We are here to provide 100% services to our customer

How To Choose The Right Tire For Your Vehicle?

Tires are one of the most important parts of your car as they make the only connection between the vehicles and the road surface. Therefore, it is very important that you choose a good set of tires for your car for your car while you improve, brakes and unwind the acceleration of your vehicle. Good quality tires can also improve fuel efficiency. On the other hand, cheap quality tires can give you an unpleasant and bumpy ride.

Below are some factors that you need to keep in mind while you select a set of tires for your car:

1) Tulle type or tubeless:
when choosing between pipe and piping tires, you always have to go thereto You have much more are advanced and safer than horticulture. They also have a number of other advantages. In addition, you do not have to bring alloy wheels to install tubeless tires. Their steel wheels will also do pretty good because they are stainless steel and have an anti-quiet coating.

2) Ribbon size:
When buying new tires, the size should pay special attention. And for that you need to know how to read the size of a band. It is generally mentioned on the side wall of a tire and is standardized. For example, 195/55 R 16 87V. We can read it to:
195 (mm) is the tread width of the belt.
55 (%) is the percentage of the tread width, which contributes to the height of the side wall.
R (radial) refers to the radial structure of the tire.
16 (inch) refers to the diameter of the wheel.
87, which relates to the load index of the tire.
V, the speed evaluation of the tire refers to the size of a tires can be shown with three parts; The size of the edge, the width of the tread of the tire and the height of the side walls.

Recommended reading: To read a band

i) RIM size:
While selecting a tape, you must remember that the size of the band is the same as that from the edge you want to install it. If your edge is greater than your tire, it lowers the height of the side wall that affects the rhythm and treatment quality of your vehicle.

II) Tread width:
You must carefully select the loop width as it is responsible for your comfort and performance on the road. The width of the tread depends on the type of driver you are on the vehicle on the vehicle that drives you. For example, if you create a lot of electricity, if you often hold high speeds while you turn, or if you want your car to have a stylish and robust look, you can go for a wider tread. However, if you want to improve your fuel kilometer position, you want to keep the steering light, or if you drive your car often in city traffic, you should not go for a wider tread.

(iii) Side wall height:
If you select the exact ridge size and the correct tread width to select the correct tread, select a sidewall height that helps to keep the overall size of the new tire that resembles from your old band .

Tread patterns:

How to select the correct tire?

Select the tread pattern of your tires, is another critical task. The tread pattern of a band plays an important role in their entire driving experience as they are responsible for performing their cars to different weather conditions. They are responsible for channeling the water when driving through a water packaging area. In short, there are three types of tread patterns:

looking for new tires? Find dealers in your area

i) Conventional tread:
It is the most commonly used tread pattern. It can be carried out in both instructions and can be mounted on the wheel both one of the unidirectional or asymmetric patterns. This type of tire is very practical with the channel of water while driving through the water packaging area. It also blocks the band noise during doing.

ii) Unidirectional tread:
The unidirectional tread patterns are most effective when rotating in a single direction. The side walls of these tires have an arrow sign mentioned in which direction should be rotated.

(iii) asymmetric profile:
The tires with asymmetric tread patterns generally have an outside of the side wall and an inside wall. The exterior is the way forward and the interior is automatically aligned. You will find a marker on the side walls in which it shows on which side is aligned and which is automatically oriented. This type of tread pattern helps with high-speed corning.

4) Rubber connection:
The rubber material used in the production of the tape is the most important criteria that must be considered when buying a tape. It is responsible for the traction and the fraudulent clothing properties of a band. If you buy a tape made of high-quality material, the tire traction and speed evaluation are high. It also helps you to get a good grip on your car.

5) Total quality:
There are a few things to consider when buying a new tire. They are:

I) Production of the call:

Purchase of your tires from a renowned production makes a lot of difference in the entire scenario. You should take the opinion of others and work on the production of themselves. The renowned tire manufacturers have modern production facilities and also offer better quality.

Ultimately, your driving style should not miss your vehicle when buying a new set of boots. For example, if you travel a lot, it is on the hilly road or the straight asphalt, it is recommended to get a summer or a rather soft band connection. This type of band does not affect the handle and the ability to drive the vehicle that makes the car predictable and also reduces the total distance of the stop. On the contrary, when it is in the city, you can just be the same after a harder connection. At stop and go, traffic cars will not achieve a high speed and know what the car does at these speeds.

Book Service At Your Nearest Location!

Please enable JavaScript in your browser to complete this form.
Car